Author - admin

How to calculate the size of the camlock coupling?

This is an imperial size Commonly used is inches 1 inch equals 25.4 millimeters 1/4" means that 1/4 inch equals 0.25*25.4 equals 6.35 mm If it is a thread, how many teeth should be left behind, such as 1/4"-24UNF It means that the major diameter of the thread is 6.35 and there are 24...

Read more...

K&G Machinery SS camlock coupling

The hose coupling is a connector on the end of a hose to connect (or couple) it with another hose or with a tap or a hose appliance, such as an irrigation sprinkler. It is usually made of steel, brass, stainless steel, aluminium or plastic. Hose fittings from K&G...

Read more...

K&G Machinery Camlock Fitting

The hose coupling is a connector on the end of a hose to connect (or couple) it with another hose or with a tap or a hose appliance, such as an irrigation sprinkler. It is usually made of steel, brass, stainless steel, aluminium or plastic. Hose fittings from...

Read more...

K&G Machinery Camlock Coupling

The hose coupling is a connector on the end of a hose to connect (or couple) it with another hose or with a tap or a hose appliance, such as an irrigation sprinkler. It is usually made of steel, brass, stainless steel, aluminium or plastic. Hose fittings from K&G...

Read more...

Hose Coupling Of K&G Machinery

The hose coupling is a connector on the end of a hose to connect (or couple) it with another hose or with a tap or a hose appliance, such as an irrigation sprinkler. It is usually made of steel, brass, stainless steel, aluminium or plastic. Hose fittings from K&G...

Read more...

Camlock coupling Instructions

● Improper selection and use of quick connector products may cause harm to surrounding personnel and application systems.● Make sure that the quick connector and its seal are suitable for the pressure, threaded interface, operating temperature, flow characteristics, etc. required for the installation system, and are compatible with the...

Read more...

Introduction of hose coupling

The hose coupling is a connector on the end of a hose to connect (or couple) it with another hose or with a tap or a hose appliance, such as an irrigation sprinkler. It is usually made of steel, brass, stainless steel, aluminium or plastic. Hose fittings from K&G are designed for use with their entire range of rubber hoses,PVC hoses and composite hoses. They have proven themselves...

Read more...

Use and selection of aluminum camlock coupling

Aluminum camlock couplings are one of the most widely used joints available today. We also need to pay attention to a lot of things when we use it. Let's briefly spread the use environment of aluminum camlock coupling.Use environment of Aluminum camlock coupling Use of aluminum camlock coupling to...

Read more...

Kangguang will participate in Shanghai PTC ASIA

Since its inception in 1991, PTC ASIA has grown from biennial to annual. The exhibition area and exhibits have been expanding and the number of professional visitors has increased exponentially, which has greatly promoted the international exchange of power transmission and control technology markets. The development of the trade...

Read more...